home page about us our products production methods contacts
production
Rotogravare Printing Click here to check our Machine Capacity  
<< Products << Process
 
Printing process using rotogravure engraved cylinders. The cylinder is placed inside the ink tray and by means of scapping, excess inks fromengraved cylinders is limited to the desired ink grammage that will be transferred to the printing films. The print quality is superior than Flexographics printing method and the cylinder life is longer than the flexographic printing method. It is good for long runs and highly critical jobs with complex designs (i.e, color separation, vanishing effect). The print quality is more detailed because of higher number of screen lines.

Both Rotogravure and Flexographics printing can be run using surface and reverse printing methods. The following materials are commonly used for this kind of printing:

  
1. BOPP – Bi-Axially Oriented Polypropylene
2. BOPP White Opaque
3. BOPP Pearlized
4. CPP – Cast Polyropylene
5. CPP White
6. OPA – Oriented PolyAmide
7. PET – Polyester
8. PPR – Paper
9. CELLO – Cellophane
10. PVC – Poly Vinyl Chloride
   11. PVC Metallized
12. LDPE – Low Density Polyethylene
13. LDPE White
14. LLDPE – Linear Low Density Polypropylene
15. HDPE – High Density Polyethylene
16. MDPE – Medium Density Polyethylene
17. ONy – Bi-Axially Oriented Nylon
18. CNy – Cast Nylon
19. and, other film materials
 
click the picture to enlarge
   
Click here to check our Machine Capacity  
Click here for the Technical Data Sheet
Copyright © Al Sharq Flexible Packaging Factories 2008 Home | About Us | Products | Production | Career | Contacts